Installing a natural gas line to a fire pit is not that difficult. However, many people still prefer a gas-fueled fire pit because of certain benefits. One of the benefits of a natural gas fire pit is fewer hassles and troubles. It is easier to operate than an electric fire pit or one that burns wood. A gas-fueled fire pit requires no stoking or feeding the flames during use, allowing you to start it with just the flip of a switch. One doesn’t need to invest time in chopping down trees in order to gather logs, only enjoy their warmth built from those logs you did find!

You can completely adjust the flame level of a gas fire pit, so when children and pets are around, you can easily reduce the flame. Additionally, this fire pit won’t burn your hand because you don’t have to touch the logs of it.

These days, people use fire pits to enjoy the outdoors. Properly installed gas fire pit is much safer than wood-burning units because they don’t produce a lot of smoke and glowing embers, so they’re less likely to cause fires. And gases won’t stick to the bottom of your chassis like coals, so you don’t need to sweep it daily; you can just hose it down every few days.

Installing a gas line for your fire pit is a very simple process, but in case you aren’t sure about the instructions, here we have a guide to assist you with installing a natural gas line to your firepit.

Installing gas line

We want to remind you that it’s always better to hire a professional for this task because we realize that gas line installation can be very dangerous. A leak in your gas line can be disastrous and lead to a serious fire, as well as the need for emergency responders, so if you’re going to undertake the project yourself, then you must take all necessary precautions.

Additionally, there are numerous codes and regulations that you have to abide by if you’re doing it yourself, and they differ from state to state, depending on where you live. So before doing anything with furnace pipe installation or gas lines without having an expert to guide you through the entire process, we must make it clear that there are many hazards involved, and improper installation can even cause death in some cases.

If you are still not convinced then and we’ll show you reasons why it’s actually a better idea to go ahead and get your project developed by design professionals. These are some points to keep in mind if you are thinking about DIY-ing it yourself:

Method of installing

  1. The first step is to buy the fitting and materials used for installing. Before purchasing the pipes, make sure that you have gotten a rough estimate of how long you want them measured. It will help you decide what size of pipes to buy. 1/2′ – 1 1/2″ pipes are great for domestic use. If the seller had prior knowledge about the way you wanted them used, he would be able to recommend fittings that would be better suited for that purpose.
  2. The thing about getting a natural gas supply to your house is that the process can be quite overwhelming. Try not to get discouraged if plans have been changing or are taking longer than you imagined. And the most important thing is that you should always make sure all of your safety precautions are taken. Whether it is turning off your gas supply or taking steps to ensure that your fittings are properly attached, always do thorough research when it comes down to implementing solutions so as not to incur additional costs down the road because some can become more complicated than others depending on how one handles them.
  3. Your house’s gas is connected through the main pipe and a T-junction that splits off the supply to multiple uses. Rather than disconnecting pipes, you can simply attach an additional T-junction to your fire pit line that would split it off and safely use the gas source for both ends.
  4. Connect the gas line to your fire pit by bolting the union you installed between the two via a security bracket.
  5. You have to make sure that your gas line isn’t leaking. Apply a mixture of water and liquid soap to all the seams in your gas line. If you notice any bubbles appearing on any seam, it means that the seam is leaking. Try and tighten the seam, but if the leakage continues, you may need to call an expert.


Gas lines must be laid out properly. They must connect your main supply to the fire pit at correct intervals in order so as not to cause problems with the pipes. Estimating will only serve to produce a pipe of irregular length and often diameter, which is dangerous and may cause complications from which you may not be able to recover.

Leakage is what makes gas risky. It can be found in the form of natural gas thousands of feet below the earth’s surface. Because it’s combustible, it should be pumped into holding tanks and transported via pipes to the user before combustion occurs. Otherwise, there will be a serious loss of pressure and a potentially disastrous leak that could spell calamity for whoever gets nearby!

When you’re installing a new gas line, make sure your home is safe and secure by shutting off the main gas supply first in case something goes wrong. This way, you won’t risk causing ablaze.


Installing a natural gas line can be a tricky and frustrating affair. In fact, as this informative article explains, it’s often best to hire an expert with the relevant experience and qualifications to ensure that work is carried out safely and correctly. That way, you can avoid any major problems or health hazards from occurring in your very own backyard!